Serving the Phoenix area  ·  (623) 321-3532  ·  Open Mon-Sun 7am-7pm
📞 (623) 321-3532 Free Quote

Metal Roofing in Tempe, AZ (85282) · Local Professionals

Phoenix Metal Roofing · Fast response in Tempe and the Phoenix area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+268Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tempe is a city of contrasts, from the historic neighborhoods near Mill Avenue and ASU to the 1950s-70s ranches with low-slope roofs that bake in the sun. If you live in 85282, you know the drill: shingles crack, coatings chalk, and fasteners back out after another 110-degree summer.

That's why homeowners in Tempe call Phoenix Metal Roofing. We've seen it all, from the sun-baked roofs near Kiwanis Park to the low-slope ranches off Rural Road, and we know how to fix them right.

Metal Roofing in Tempe (85282)

Tempe's housing stock is a mix of 1950s-70s block-and-stucco ranch homes with low-slope shingle, foam, and gravel roofs, plus some older adobe-brick and stucco bungalows near downtown. Many of these roofs have been patched and coated for decades, and the intense UV and summer heat above 110 degrees have taken a toll. The flat terrain and desert landscaping mean drainage is critical, and monsoon storms from July to September can send water pooling where it shouldn't. We also see plenty of carports, patios, and outbuildings with exposed-fastener R-panel that need re-fastening or replacement after wind events.

Our team has worked on roofs across Tempe and the surrounding Phoenix area, from historic districts to newer subdivisions. We understand the local building codes and the specific challenges of roofing in the Valley of the Sun.

Our services in Tempe

How a Job Works in Tempe

Step 1: Call us at (623) 321-3532 or request a free estimate online. We'll schedule a time to inspect your roof, discuss your options, and provide a written quote. We'll also check for any permit requirements with the City of Tempe website.

Step 2: Once you approve the estimate, we'll order materials and schedule the work. For homes in tight lots or HOA communities, we coordinate access and any necessary approvals. We pull the required permits and handle inspections so you don't have to.

Step 3: After installation, we clean up thoroughly, haul away all debris, and walk you through the finished roof. We make sure you're satisfied before we leave.

Pricing for metal roofing in Tempe depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. For repairs, expect around $450 for leak fixes, and screw replacement starts at $750. Coating and painting start at $2.50 per square foot. We offer free estimates, so call (623) 321-3532 to get a precise quote for your home.

My 1960s ranch near Rural Road has a low-slope shingle roof that's failing. Can you install metal over it?
Yes, we can often install a metal roof over your existing shingles with a retrofit system, which saves you the cost of tear-off. We'll inspect the decking and underlayment first to make sure it's sound. This is a common solution for Tempe's older ranches.
A monsoon storm just lifted some panels on my carport. How quickly can you respond?
We prioritize storm damage calls. Call us at (623) 321-3532 and we'll schedule an inspection as soon as possible, often within 24-48 hours. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot home in Tempe?
For a 1,500 square foot home, a basic metal roof replacement might range from $13,500 to $18,000, depending on the material and roof complexity. Standing seam or stone-coated steel will be at the higher end. We provide free estimates to give you an exact price.
Do I need a permit to replace my roof in Tempe?
Yes, roofing permits are typically required for a full replacement or re-roof in Tempe. The requirements and fees vary, so it's best to check with the city. We handle the permitting process for you and ensure all inspections are passed. You can find more information on the City of Tempe website.
My HOA requires a specific roof color. Can you help with approval?
Absolutely. We're familiar with many HOAs in Tempe and can provide material samples and documentation for your HOA's architectural review. We'll coordinate with them to ensure the color and profile meet their guidelines.
Are you fully insured for roofing work in Tempe?
Yes, we carry general liability insurance and workers' compensation coverage for your protection.
How often should I have my metal roof inspected in Tempe?
Given the intense sun and monsoon storms, we recommend an inspection every two to three years. We check for loose fasteners, sealant deterioration, and debris buildup. Regular maintenance can extend the life of your roof and prevent costly leaks.
Why choose us?

Trusted professionals in Phoenix

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Phoenix

All your work handled by qualified professionals in Phoenix

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

268+ Verified Client Reviews in Phoenix

⭐⭐⭐⭐⭐ 4.9/5 · 268 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Phoenix · Response within 24h · No commitment · ☎ (623) 321-3532

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Phoenix ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm