Serving the Phoenix area  ·  (623) 321-3532  ·  Open Mon-Sun 7am-7pm
📞 (623) 321-3532 Free Quote

Metal Roofing in Chandler, AZ (85286) · Local Professionals

Phoenix Metal Roofing · Fast response in Chandler and the Phoenix area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+268Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Chandler's 1980s through 2000s stucco subdivisions are hitting their first roof replacements, and the concrete tile and shingle roofs that looked fine five years ago are now showing cracked tiles, backed-out fasteners, and monsoon leaks. If you live near Tumbleweed Park or along the Loop 202 corridor in 85286, you already know the summer sun here does not forgive a tired roof.

Phoenix Metal Roofing installs, repairs, and replaces metal roofs across Chandler and the surrounding East Valley. We know the difference between a 1990s two-story in Fox Crossing and a horse property off Riggs Road with a corrugated workshop, and we price and build for both.

Metal Roofing in Chandler (85286)

Chandler sits flat on the Sonoran Desert floor, which sounds simple until you are on a tight cul-de-sac lot in Sunstone or a half-acre horse property near Gilbert Road with a shop, a corral, and a driveway that barely fits a truck and trailer. Most of the housing stock here is stucco over block or wood frame with concrete tile or asphalt shingles, and the roof pitch is often low enough that proper underlayment and flashing details matter more than the panel itself. Summer highs over 110 degrees bake sealants and back fasteners out, and monsoon microbursts peel edge panels and drive dust and water into every gap. We plan for that with high-temp underlayments, screw schedules built for thermal movement, and flashing that handles the sudden cloudbursts that roll off South Mountain.

Our team has worked roofs across Chandler, from the older ranches near downtown Chandler to the newer builds out by Chandler Heights. We pull permits, coordinate with HOAs, and keep the job site clean in a neighborhood where your neighbors are close enough to notice.

Our services in Chandler

How a Job Works in Chandler

Step 1: Call us at (623) 321-3532 or request a free estimate. We schedule an on-site assessment, walk the roof and attic, check flashing, fasteners, and decking, and give you a written scope with pricing before any work starts.

Step 2: We handle the permit through the City of Chandler and coordinate HOA submittals if your subdivision requires design review. On tight lots we stage materials in the driveway or street per city rules, protect landscaping and pool decks, and keep the crew moving so your roof is dried in the same day when possible.

Step 3: We clean the yard, magnet-sweep for fasteners, haul away old material, and do a final walkthrough with you. We leave your property clean and show you exactly what was done.

Metal roofing in Chandler is priced by the square foot, and the range depends on the system. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, installation around $8, replacement around $9, and standing seam around $10. Metal shingle and stone-coated steel run around $9, while copper and specialty metal start around $20. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, flashing and skylight repair at $600, and gutters at $9 per linear foot. Size, roof access, decking condition, and urgency all move the number, so call (623) 321-3532 for a free estimate on your Chandler property.

My 1990s tile roof in Fox Crossing is cracking and leaking. Is metal shingle roofing a good fit for this kind of Chandler subdivision?
Yes. Metal shingle roofing is one of our most popular upgrades in Chandler's 1980s to 2000s stucco subdivisions because it gives you the look of tile or shake without the weight and breakage. We inspect your decking and underlayment first, then recommend a profile and color that fits your HOA and the low-pitch roof lines common here.
A monsoon storm just peeled back panels on my roof near Chandler Heights. How fast can you respond?
We prioritize active leaks and storm damage in Chandler. Call (623) 321-3532 and we will schedule an inspection, tarp or secure the roof if needed, and give you a repair or replacement scope. We document damage for insurance claims, though coverage and deductibles are always between you and your carrier.
What does a typical metal roof replacement cost for a 2,000 square foot home in 85286?
Most Chandler homes in that size range fall between roughly $16,000 and $24,000 for a full metal roof replacement, depending on the system, pitch, access, and whether decking needs repair. Standing seam and copper run higher, while retrofit over existing shingles can lower the number. We give you a written estimate after seeing the roof.
Do I need a permit from the City of Chandler for a metal roof replacement?
Yes, a full replacement or re-roof typically requires a permit, and the rules and inspection requirements are set by the city. We pull the permit for you and schedule inspections. You can verify current requirements on the City of Chandler website or by calling the building department directly.
My HOA in Chandler requires design approval. Can you help with that, and what about the property line with my neighbor?
We regularly work with Chandler HOAs on panel profile and color submittals and can provide the documentation they ask for. On property lines, we keep all work and staging on your side and follow city setback and drainage rules so runoff does not create a neighbor issue.
Are you insured for roofing work at my Chandler property?
Yes. Phoenix Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance should Chandler homeowners do between monsoon seasons?
Have your roof inspected in spring before the July to September storms. We check fasteners, sealant, flashing, and panel edges, clear debris from valleys and gutters, and re-secure anything loose. That preventive visit is the best way to avoid a mid-monsoon leak call.
Why choose us?

Trusted professionals in Phoenix

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Phoenix

All your work handled by qualified professionals in Phoenix

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

268+ Verified Client Reviews in Phoenix

⭐⭐⭐⭐⭐ 4.9/5 · 268 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Phoenix · Response within 24h · No commitment · ☎ (623) 321-3532

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Phoenix ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm