Licensed & Insured, in Phoenix and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Phoenix
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (623) 321-3532 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Phoenix and surrounding areas · On-site visits included · Free estimate within 24h
Phoenix Metal Roofing is a team of local certified professionals based in Phoenix. We respond quickly in Phoenix and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (623) 321-3532⭐⭐⭐⭐⭐ 4.9/5 · 268 verified Google reviews
“Had our whole 2,400 sq ft house done in standing seam and the crew knocked it out in four days flat. They tarped everything, cleaned up so well you couldn't tell anyone had been there. The panels look incredible against the desert sky.”
Metal Roof Installation
“We wanted a copper awning over our front entry and honestly didn't think anyone local would take on such a small custom job. They did it beautifully and the soldered seams are flawless. It's become the best-looking part of the house.”
Copper & Specialty Metal Roofing
“Called them out to look at my barn roof out past the citrus grove after the last windstorm and they found a bunch of backed-out screws I never would have caught. Re-fastened everything and gave me a full written report. Fair price, no upsell.”
Metal Roof Inspection
“The old shingles were curling and we were dreading the mess of a tear-off. They did the metal roof over shingles retrofit instead and it was so much faster than I expected, about a week for the whole house. The desert heat doesn't even touch it now.”
Standing Seam Metal Roofing
“They installed corrugated panels on my shop and added ridge vents for ventilation while they were at it. Only gripe is they showed up a day later than scheduled, but the work itself is solid and the airflow difference is night and day.”
Corrugated & Ribbed Panel Roofing
“Full replacement on our 1970s ranch house, and they had to fix some sketchy flashing around the chimney from the old roof. Crew of five, done in six days, and they hauled off every last scrap. I was genuinely surprised how painless the whole thing was.”
Metal Roof Replacement
“Had a leak over the kitchen every monsoon season for three years. These guys traced it to a failed skylight flashing in about twenty minutes and had it sealed the same afternoon. Haven't seen a drop since.”
Metal Roof Leak Repair
“Went with stone-coated steel tiles to keep the Spanish tile look the HOA wanted, and the installers matched the trim and valleys perfectly. Took them about two weeks on our 3,000 sq ft place. Neighbors keep asking who did it.”
Stone-Coated Steel RoofingReal photos of our work in Phoenix · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel installation | Starting at $8/sq ft | Includes tear-off of one layer, high-temp underlayment and standard trim; price rises with roof pitch and access difficulty. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and formed panels; higher cost on cut-up roofs with valleys, skylights and complex flashing. |
| Stone-coated steel installation | Starting at $11/sq ft | Tile-profile steel for HOA or historic look; material and detail time drive the final figure. |
| Metal shingle installation | Starting at $10/sq ft | Stamped panels in shingle profile; deck repairs and penetration count affect the per-square-foot rate. |
| Complex or large-scale job | On estimate | Multi-level roofs, historic review, heavy flashing work or commercial scope need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (623) 321-3532, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, standard trim and flashing on a straightforward gable. |
| Standing seam, cut-up roof with valleys and hips | Starting at $14/sq ft | Covers added labor for multiple valleys, hips, dormers and complex flashing details. |
| Tear-off and deck repair | Quoted separately | Priced after we inspect the deck for soft sheathing and count existing shingle layers. |
| Copper or specialty metal accents | On estimate | Material cost and panel size vary widely, so we price from the actual drawings. |
| Travel | Included | In Phoenix and surrounding Valley communities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, new panels and trim; pitch and access move the price. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and formed seams; panel width, finish and roof complexity drive cost. |
| Stone-coated steel or metal shingle replacement | Starting at $13/sq ft | Tile or shingle profile with underlayment and trim; HOA review and pitch affect the total. |
| Complex or large-scale job | On estimate | Multiple roof levels, heavy decking repair or historic district review need an on-site look first. |
| Travel | Included | In Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one layer of shingles | Starting at $7/sq ft | Includes underlayment, panels and standard flashing on a sound single-layer deck. |
| Standing seam retrofit | Starting at $9/sq ft | Concealed-fastener panels on purlins, priced higher for the panel and trim work. |
| Stone-coated steel retrofit | Starting at $10/sq ft | Tile-profile panels for HOA and historic districts, with valley and ridge trim included. |
| Deck repair and subframe | On estimate | Soft sheathing, uneven decks and batten systems need an on-site look before pricing. |
| Travel | Included | In Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and sealant repair | Starting at $450 | Covers a focused pass on loose screws, dried washers and failed sealant on a small roof area. |
| Flashing and penetration repair | Starting at $650 | Rebuilds flashing at a chimney, skylight or wall transition, including sealant and metal work. |
| Panel replacement (hail or wind) | Starting at $900 | Replaces dented or lifted panels; price moves with panel profile, color match and panel count. |
| Storm or wind damage repair | On estimate | Needs an on-site look because the scope depends on how many panels lifted and what the underlayment shows. |
| Travel | Included | In Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Includes diagnostic inspection, the repair itself and a written summary of the leak source. |
| Fastener and washer replacement | Starting at $650 | Covers pulling failed screws, new sealing washers and resetting them in line. |
| Flashing or boot rebuild | Starting at $850 | Rebuilds separated wall, parapet or skylight flashing, or replaces split pipe boots. |
| Multiple leaks or large area | On estimate | Needs an on-site look to map every source and confirm whether repair still makes sense. |
| Emergency tarping after monsoon | Starting at $350 | Temporary storm tarping to stop water until a full repair can be scheduled. |
| Estimate | Free | Response within 24 hours at (623) 321-3532, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Small patio cover or carport re-fastening | Starting at $750 | Covers a typical 20 by 20 roof with a normal spread of failed fasteners and washers |
| Full residential roof fastener sweep | Starting at $1,450 | Whole-roof replacement of failed screws with oversized fasteners and UV-resistant washers |
| Lap re-seat and closure strip replacement | Starting at $950 | Resets wind-lifted panel laps and replaces failed ridge and eave closures |
| Complex or large-scale job | On estimate | Steep or high-access roofs and large shop or commercial runs need an on-site look first |
| Travel | Included | in Phoenix and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (standard profile) | Starting at $5.50/sq ft | Includes standard corrugated panels, basic trim and fasteners on a sound deck |
| R-panel or 5V ribbed roof | Starting at $6.25/sq ft | Ribbed profile with matched closures, ridge caps and cool-roof paint finish |
| Insulated panel installation | Starting at $9.00/sq ft | Foam-core panels for workshops and rooms that need heat and sound control |
| Complex or large-scale job | On estimate | Tall barns, tight access lots and multi-structure properties need an on-site look first |
| Travel | Included | in Phoenix and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard profile | Starting at $9/sq ft | Includes tear-off, new underlayment, shingles and standard trim; pitch and roof complexity move the price. |
| Premium profile (slate, tile, shake) | Starting at $12/sq ft | Textured and stone-coated profiles cost more in material; historic district and HOA approvals add time. |
| Roof with deck repair or steep pitch | On estimate | Soft sheathing, second stories and steep pitches need an on-site look before we quote a firm number. |
| Travel | Included | In Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Includes underlayment, standard panels, and basic flashing; pitch and tear-off move the price. |
| Spanish tile profile | Starting at $11/sq ft | Includes tile-look panels and formed flashing; roof complexity and valleys raise the figure. |
| Retrofit over existing deck | Starting at $10/sq ft | Includes deck inspection and new underlayment; skip tear-off disposal to hold cost down. |
| Complex or large-scale job | On estimate | Cut-up rooflines, multiple chimneys, and historic review need an on-site look first. |
| Travel | Included | In Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, dormer) | Starting at $20/sq ft | Includes custom fabrication and soldered flashing; complexity of the detail moves the price. |
| Full copper standing seam roof | Starting at $28/sq ft | Includes concealed clips, soldered seams and UV-rated underlayment; roof complexity and deck condition move it. |
| Zinc or aluminum specialty roof | Starting at $18/sq ft | Includes panels and standard flashing; custom profiles and access add cost. |
| Complex or large-scale job | On estimate | Multi-plane roofs, historic districts and custom architecture need an on-site look before we quote. |
| Travel | Included | in Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic clean and coat | Starting at $2.50/sq ft | Pressure wash, surface prep and one reflective acrylic coat on a sound, low-rust metal roof. |
| Rust treatment system | Starting at $3.25/sq ft | Wire brush, rust converter, primer and topcoat on exposed-fastener panels with surface rust. |
| Cool-roof rated coating | Starting at $3.75/sq ft | High solar reflectance coating for low-slope metal over living space, priced by square footage. |
| Complex or steep roof | On estimate | Steep pitch, cut-up planes or heavy prep needs an on-site look before we quote a number. |
| Travel | Included | In Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney or skylight re-seal and re-fastening | Starting at $600 | Includes removing failed sealant, replacing backed-out screws and applying UV-rated sealant at one penetration. |
| Custom-bent flashing replacement | Starting at $900 | In-house fabrication and installation of counter or curb flashing for one chimney or skylight. |
| Multiple penetrations or complex valley work | On estimate | Priced after an on-site look at pitch, roof type, number of penetrations and access. |
| Emergency monsoon leak response | On estimate | After-hours scheduling and temporary water control, priced by urgency and scope. |
| Travel | Included | In Phoenix and surrounding Valley communities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (623) 321-3532, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single entry rail run | Starting at $1,200 | Covers a short bar-style rail over one entry or walk, including clamps and labor, on a standard pitch. |
| Pad-style guards, cabin roof | Starting at $1,800 | Pad guards across a steep high-country cabin roof, priced by hardware count and roof pitch. |
| Clamp-on seam mount system | Starting at $2,200 | Non-penetrating seam clamps on standing seam, priced by linear feet and seam spacing. |
| Guard work plus re-fastening | On estimate | Needs an on-site look because fastener condition and panel profile change the scope. |
| Travel | Included | In Phoenix and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, fastener and flashing inspection with photo documentation and a written repair scope. |
| Minor repair (screws, sealant, small flashing) | Starting at $350 | Re-fastening, sealant refresh and small flashing repairs, priced by roof access and height. |
| Panel replacement (localized) | Starting at $850 | Replacement of damaged panels and seams, priced by panel profile and whether material is still in production. |
| Widespread storm damage repair | On estimate | Multi-panel uplift or deck damage needs an on-site look before a number is given. |
| Insurance documentation package | Included | Before-and-after photos and written scope for your claim, included with any repair we perform. |
| Travel | Included | In Phoenix and surrounding Valley cities, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full walk-over with fastener, seam and flashing check, photos and written report included. |
| Post-monsoon damage inspection | Starting at $150 | Targeted storm check with documentation; price moves with roof height and panel count. |
| Insurance documentation inspection | Starting at $200 | Photo-documented report for a claim file; scope rises with number of roof planes. |
| Complex or large-scale roof | On estimate | Multiple roof planes, steep pitch or commercial scope needs an on-site look first. |
| Travel | Included | In Phoenix and surrounding Valley cities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (623) 321-3532, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, single story | Starting at $9/linear ft | Includes on-site rolling, hidden hangers, downspouts and splash blocks on an accessible single-story run. |
| Half-round steel or copper profile | Starting at $18/linear ft | Traditional profile with exposed hangers, priced higher for copper and for historic elevation requirements. |
| Non-penetrating seam clamp upgrade | Add $2 to $4/linear ft | Clamps the standing seam rib without piercing the panel so the roof warranty stays intact. |
| Debris screen and cleanout package | Starting at $6/linear ft | Screens the trough and adds removable cleanouts where palms, mesquite or citrus load the gutter. |
| Complex or large-scale job | On estimate | Two-story pitches, buried discharge lines, pool cages or tight side yards need an on-site look before a number. |
| Estimate and travel | Free, travel included | In Phoenix and surrounding areas, no separate call-out fee, response within 24 hours at (623) 321-3532. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written report | Free estimate | On-site walk, photos of fastener and flashing condition, and a written scope with no obligation |
| Screw replacement and re-fastening | Starting at $1,200 | New larger-diameter screws and washers on backed-out panels, priced by roof square footage and access |
| Exposed-fastener R-panel installation | Starting at $8.50 per sq ft | Screw-down ribbed panels with closures and edge metal, moving up with insulation and tear-off |
| Standing seam installation | Starting at $14 per sq ft | Concealed-fastener panels with raised seams, priced higher for complex roofs and HVAC detailing |
| Insulated panel system | On estimate | Rigid insulation or liner under metal, needs an on-site look at purlin spacing and building use |
| Travel | Included | In Phoenix and surrounding Valley cities, with no separate call-out or mileage fee |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Phoenix need a crew that understands desert heat, monsoon wind, and the specific metal roof stock found across the Valley. Phoenix Metal Roofing is that local resource, handling metal roof installation, replacement, re-roof, and repair on homes from historic downtown bungalows to newer stucco subdivisions. We work on low-slope and steep pitches, over heavy tree cover and open desert exposure, and on the large inventory of aging screw-down roofs whose fasteners are due for service.
Our network of licensed, insured local contractors serves Phoenix, Mesa, Scottsdale, Tempe, Glendale, and the surrounding communities. Whether you need a standing seam system on a Spanish Colonial Revival home or a repair on a corrugated patio cover, we bring straight guidance and trade-level workmanship to every project.
Metal roofs fail in predictable ways, and most leaks start small. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as EPDM sealing washers dry, shrink, and crack under intense UV. Once the washer fails, water reaches the screw shank and the hole enlarges. Seam separation from thermal movement is another common issue: panels expand and contract daily, and if clips or fasteners are inadequate, seams open. Failed pipe boots, flashing at chimneys, skylights, and valleys let water in at transitions, while wind-lifted panels and punctures from fallen limbs create sudden openings.
Ignoring these problems makes them worse. Water tracks along purlins and decking far from the entry point, leading to rotted sheathing and insulation damage that turns a simple repair into a larger restoration. That is why we recommend addressing active leaks promptly with metal roof leak repair before secondary damage sets in.
We are honest about the repair-versus-replace call. If the panels are sound and the issue is fasteners and seals, a full screw replacement and re-fastening often restores a watertight roof for a fraction of replacement cost. When the metal itself is compromised, we will tell you plainly. Call (623) 321-3532 or request a free estimate to discuss your repair.
We install and service the full range of metal roofing systems, matching the right one to your home and budget. Standing Seam Metal Roofing uses concealed clips for a clean look and no exposed fasteners to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison: standing seam costs more upfront but has no exposed screws to service; screw-down costs less and requires fastener maintenance over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; when it is not, tear-off is the right call.
Metal roof costs in Phoenix are typically quoted per square foot for installations, while repairs are often flat-rate. Final pricing depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We provide clear, written estimates so you can compare options without pressure. Some carriers may offer premium discounts for metal or impact-rated roofs, but you should confirm any discount directly with your insurer.
For a closer look at typical ranges, visit our pricing page, then request a free estimate or free roof inspection. Final pricing depends on the roof and site conditions.
After a monsoon storm, we inspect your roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We never suggest that a deductible could be waived, absorbed, or paid by the contractor. Our role is to document conditions accurately so you can make an informed decision.
On permits: in most jurisdictions, a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. We are informational only and do not provide legal or code advice. Requirements vary, always verify with the Phoenix building or planning department before starting your project. Contact us with questions about your specific property.
Ready to get started? Phoenix Metal Roofing serves in Phoenix and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Phoenix · Response within 24h · No commitment · ☎ (623) 321-3532
Your Free Quote Request