Serving the Phoenix area  ·  (623) 321-3532  ·  Open Mon-Sun 7am-7pm
📞 (623) 321-3532 Free Quote

Metal Roofing in Peoria, AZ (85383) · Local Professionals

Phoenix Metal Roofing · Fast response in Peoria and the Phoenix area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+268Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Peoria is a west-valley city where 1990s to 2020s stucco subdivisions with concrete tile roofs meet horse properties and workshops on larger lots, and the Lake Pleasant foothills take the brunt of monsoon microbursts and hail. If you live near the Peoria Sports Complex or out by Vistancia, you know how hard the summer sun and sudden storms can be on a roof.

Homeowners in Peoria (85383) call Phoenix Metal Roofing because we understand the local failure modes: fasteners backing out from extreme heat swings, wind-lifted panels after a haboob, and flashing gaps that show up as active leaks during the first big rain.

Metal Roofing in Peoria (85383)

Peoria stretches from older, flatter neighborhoods near downtown Peoria and Peoria Avenue out to the newer master-planned communities like Vistancia and the homes tucked against the Lake Pleasant foothills. The terrain matters: many lots in the foothills have grade changes and tight side yards, so we plan staging and material drops carefully to avoid damaging landscaping or blocking neighbors. In the west valley, monsoon microbursts can peel back poorly fastened panels, and hail occasionally dents or loosens fasteners. The intense UV and 110-degree summer highs bake sealants and cause fasteners to back out over time, which is why we see so many leak calls on older exposed-fastener roofs. We also work on horse properties and outbuildings with corrugated and R-panel metal, where snow guards are rarely needed but wind uplift is a real concern. Our team has been serving Peoria and the surrounding Phoenix area for years, and we know the local building departments and HOA design review quirks.

Our services in Peoria

How a Job Works in Peoria

Step 1: You call us at (623) 321-3532 or request a free on-site assessment. We inspect your roof, check for active leaks, failed fasteners, and flashing issues, and talk through options like repair, replacement, or a retrofit over existing shingles. We also note any HOA or historic district requirements that might affect panel profile or color.

Step 2: Once you approve the estimate, we handle permits with the city of Peoria (requirements vary, so we verify with the local building department) and schedule the work. On tight lots in the foothills or older neighborhoods, we plan material delivery and staging to keep access clear. For standing seam or stone-coated steel installs, we protect your landscaping and coordinate with any HOA design review.

Step 3: After the install or repair, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you know how to maintain your new metal roof and that everything meets our standards before we leave.

Pricing in Peoria depends on the job. For a typical 1,500 to 2,000 square foot roof, metal roof installation starts around $8 per square foot, standing seam from $10, and metal roof replacement from $9. A retrofit over existing shingles starts at $7 per square foot. Smaller repairs, like leak fixes or flashing repair, start at $450, and screw replacement or re-fastening starts at $750. Corrugated and ribbed panel roofing is our most budget-friendly option at $5.50 per square foot, while copper and specialty metal start at $20. Key cost factors include roof size and complexity, access (tight lots or steep grades cost more), the condition of the existing roof, and urgency (storm damage after a monsoon may need temporary measures first). We give free estimates, so call (623) 321-3532 to get a realistic number for your Peoria home.

My house is in the Lake Pleasant foothills and we get strong winds. Will a standing seam roof hold up better than exposed-fastener panels?
Yes, standing seam is generally more wind-resistant because the fasteners are hidden and the panels are attached with clips that allow for thermal movement. In the foothills, where microbursts can be intense, we often recommend standing seam for its uplift resistance. We also use wind-rated fasteners and inspect the decking to make sure it can handle the load.
A monsoon storm just lifted some panels on my roof in Peoria. Can you help quickly?
We prioritize storm damage calls. Call us at (623) 321-3532 and we will schedule an inspection, often same or next day. We can tarp or secure the area to prevent further damage, then provide a repair estimate. We document everything for your insurance claim if needed, but coverage depends on your policy.
What does a typical metal roof repair cost in Peoria?
Most repairs start at $450 for leak fixes or flashing repair. Screw replacement and re-fastening start at $750. The final cost depends on the extent of damage, roof access, and whether we need to replace panels or just fasteners. We give a free estimate so you know before we start.
Do I need a permit for a metal roof replacement in Peoria, and does the city have specific requirements?
Yes, roofing permits are commonly required for a full replacement or re-roof in Peoria, and thresholds and fees vary. We handle the permit application and coordinate inspections. We always verify current rules with the city of Peoria building department because they can change. If your home is in a historic district or HOA, there may be additional design review.
My HOA requires a certain roof color. Can you help with approval, and what about property lines?
We can provide color samples and documentation for your HOA design review. We recommend getting approval before ordering materials. As for property lines, we respect them and plan staging within your property. If a neighbor's tree overhangs, we will discuss trimming or access before work begins.
Are you fully insured for work on my Peoria property?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and our crew in case of an accident on your property.
How often should I have my metal roof inspected in Peoria, and what should I check after monsoon season?
We recommend an inspection every two to three years, and always after a major monsoon storm or hail event. Check for loose fasteners, lifted panels, and any signs of leaks around flashing and penetrations. In Peoria, the intense UV and heat swings can cause sealants to degrade, so a professional inspection can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Phoenix

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Phoenix

All your work handled by qualified professionals in Phoenix

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

268+ Verified Client Reviews in Phoenix

⭐⭐⭐⭐⭐ 4.9/5 · 268 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Phoenix · Response within 24h · No commitment · ☎ (623) 321-3532

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Phoenix ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm