Serving the Phoenix area  ·  (623) 321-3532  ·  Open Mon-Sun 7am-7pm
📞 (623) 321-3532 Free Quote

Metal Roofing in Mesa, AZ (85206) · Local Professionals

Phoenix Metal Roofing · Fast response in Mesa and the Phoenix area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+268Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mesa is the kind of place where the sun does most of the talking. Drive through the older neighborhoods off Main Street and University, and you will see 1960s to 1980s ranch homes with carports, low-slope shingle roofs, and fasteners that have been baked loose by decades of 110-degree summers. Head out toward the 85206 ZIP code and you are in a mix of block-and-stucco houses, patio homes, and small commercial buildings that all face the same desert reality: intense UV, monsoon microbursts, and dust that works its way into every seam.

That is why Mesa homeowners call Phoenix Metal Roofing. We know the difference between a carport panel that is rattling loose after a haboob and a shingle roof that is curling at the edges because it has cooked through one too many Julys. We are based in Phoenix, we work Mesa every week, and we bring the same straightforward approach to a small screw replacement in a 55-plus community near Brown and Higley as we do to a full standing seam install on a custom home near the Usery Mountain foothills.

Metal Roofing in Mesa (85206)

Mesa sits on the flat valley floor, but the work here is not the same from one block to the next. In the older grid near downtown Mesa, you have narrow lots, mature citrus and mesquite trees, and low-pitched roofs that were never designed for a lot of attic ventilation. Access can be tight, and we often have to plan panel delivery around alleys, carports, and block walls. Out in 85206 and the neighborhoods around Superstition Springs and Red Mountain, you have larger lot subdivisions with concrete tile and shingle roofs, plus horse properties and workshops with corrugated or R-panel metal that take a beating from the sun and monsoon wind. The ground is caliche and desert gravel, so drainage is less about slope and more about making sure water moves away from the slab and the walls during a sudden cloudburst.

Our team has worked on everything from adobe-brick bungalows near the historic districts to stone-coated steel roofs in Spanish tile profiles that match the neighborhood look. We know how to handle the heat, the dust, and the fasteners that back out after a wide daily temperature swing. When we inspect a roof in Mesa, we are looking for the failure modes that actually happen here: lifted panels after a microburst, dried-out sealant around flashing, and screws that have wallowed out their holes in the deck.

Our services in Mesa

How a Job Works in Mesa

Step 1 is a free on-site assessment. We come out, get on the roof if it is safe, and look at the deck, the fasteners, the flashing, and the drainage. We take photos, explain what we see in plain language, and give you a written estimate. If you are in a historic district or an HOA, we will flag that early so you know what to expect before you commit.

Step 2 is the work itself. For a retrofit over shingles, we confirm the existing layers and deck condition first, because Mesa code and the local building department have limits on how many layers you can recover. We pull the permit if one is required, and we coordinate with your HOA on panel profile and color if that applies. On tight lots near downtown, we plan material staging so we are not blocking your neighbor's driveway or the alley. Most jobs are scheduled around the weather, and we do not leave an open roof exposed to a monsoon storm.

Step 3 is cleanup and a final walkthrough. We magnet-sweep for screws and nails, haul away old material, and walk the roof and the yard with you so you can see the finished work. We leave your property clean, and we do not consider the job done until you have had a chance to ask questions.

Pricing in Mesa depends on the size of the roof, the pitch, the condition of the deck, access, and how quickly you need it done. For a typical Mesa ranch home, metal roof over shingles starts around $7 per square foot, installation starts around $8, and standing seam starts around $10. A full replacement starts around $9 per square foot. Smaller jobs are priced differently: a metal roof repair or leak repair starts around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Coating and painting starts around $2.50 per square foot. These are ballpark starting figures, not a quote. The best way to get a real number is to call us at (623) 321-3532 for a free estimate. We will look at your roof, explain the options, and give you a written price with no surprises.

My carport roof in Mesa is rattling and some screws have backed out. Can you fix that without replacing the whole roof?
Yes. That is one of the most common calls we get in Mesa, especially on older carports and patios with exposed-fastener R-panel. The heat and daily temperature swings work screws loose over time. We inspect the panels, replace the failed screws with the right fasteners and washers, re-seat any lifted panels, and check the flashing. If the panels are still sound, re-fastening is a fraction of the cost of a new roof. If the deck or panels are too far gone, we will tell you straight.
A monsoon storm just lifted some panels on my roof in Mesa. How fast can you get out?
We prioritize active leaks and storm damage. Call us at (623) 321-3532 and describe what you are seeing. We will schedule an inspection as quickly as we can, often the same day or next day depending on the schedule. If there is an open roof, we can often do a temporary tarp or secure the panels to prevent further water damage while we put together a repair plan.
What does a metal roof cost for a typical Mesa ranch home?
For a standard ranch home in Mesa, metal roof over shingles starts around $7 per square foot, installation starts around $8, and standing seam starts around $10. A full replacement starts around $9. Those are starting figures. The actual price depends on square footage, roof pitch, how many layers are already there, access, and whether any deck repair is needed. Call (623) 321-3532 for a free estimate with a real number.
Do I need a permit to replace my roof in Mesa, and how do I check?
Roofing permits are commonly required for a full replacement or re-roof in Mesa, and the rules on layers, inspections, and fees vary. The best move is to check with the City of Mesa before you start. We can help you understand what is typically required, and we pull permits when they are needed. You can find the city's official site at https://www.mesaaz.gov/ for contact information and current requirements.
My HOA has rules about roof color and panel style. Can you help with that?
Yes. HOA design review is common in Mesa subdivisions, especially in newer areas and in neighborhoods with Spanish tile profiles. We can provide product specs, color samples, and panel profiles for your HOA submission. If you are in a historic district, there may be additional design review. We will flag that early so you are not surprised by a delay. We do not approve anything for the HOA, but we give you the documentation you need to get through the process.
Are you fully insured for work at my Mesa property?
Yes. Phoenix Metal Roofing is fully insured, with general liability and workers' compensation coverage. If a crew member is injured on your property, workers' compensation is there, and general liability protects you if something goes wrong. We do not cut corners on coverage.
What should I do to maintain a metal roof in Mesa between monsoons?
The main thing is to keep the roof clear of debris and to have the fasteners and sealant checked once a year. Mesa's sun dries out sealant around flashing and skylights, and monsoon wind can work screws loose. A quick inspection in late spring, before the July to September storms, catches most problems early. We offer free estimates for inspections, and we can re-caulk, re-fasten, or replace washers before a small issue becomes a leak.
Why choose us?

Trusted professionals in Phoenix

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Phoenix

All your work handled by qualified professionals in Phoenix

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

268+ Verified Client Reviews in Phoenix

⭐⭐⭐⭐⭐ 4.9/5 · 268 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Phoenix · Response within 24h · No commitment · ☎ (623) 321-3532

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Phoenix ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm