Serving the Phoenix area  ·  (623) 321-3532  ·  Open Mon-Sun 7am-7pm
📞 (623) 321-3532 Free Quote

Metal Roofing in Paradise Valley, AZ (85253) · Local Professionals

Phoenix Metal Roofing · Fast response in Paradise Valley and the Phoenix area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+268Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Paradise Valley is not like the rest of the Valley. The lots are bigger, the houses are custom, and the roofs are often tile, flat, or copper, not the shingle and foam you see in most of Phoenix. From the slopes of Camelback Mountain to the estates off Mockingbird Lane, homes here sit on large, landscaped lots with privacy walls and long driveways, and the roofing work has to match that level of detail.

We are Phoenix Metal Roofing, and we serve Paradise Valley (85253) and the surrounding Phoenix area. Homeowners call us when they want a standing seam or copper roof that holds up to the desert sun and looks right on a custom home, or when a monsoon storm has lifted a panel or opened a seam on an older metal roof. We know the housing stock here, from the Spanish Colonial Revival homes near the Arizona Biltmore to the newer custom builds tucked against Mummy Mountain.

Metal Roofing in Paradise Valley (85253)

Paradise Valley is a different kind of roofing market. The town is built around large, custom homes on generous lots, many of them with complex rooflines, tile or flat roofs, and architectural details that require careful flashing and transitions. The terrain matters too. Homes on the slopes of Camelback Mountain and Mummy Mountain often have steep grades, limited access, and drainage that has to be managed carefully so water moves away from the house and not into a neighbor's yard. The intense UV and summer heat above 110 degrees bake sealants and make fasteners back out, and monsoon microbursts can peel back panels that were not secured properly. We see a lot of copper accents on porches and bay windows, standing seam in charcoal and bronze, and stone-coated steel in a Spanish tile profile that matches the look of the surrounding desert. Our team has worked on these roofs for years, and we understand how to detail them so they perform in this climate.

We have installed and repaired metal roofs across Paradise Valley and the Phoenix area, from the historic districts near downtown to the newer custom homes in the foothills. We know the local building departments and what they look for, and we know how to work with HOA design review when a roof profile or color needs approval.

Our services in Paradise Valley

How a Job Works in Paradise Valley

Step 1: You call us at (623) 321-3532 or request a free estimate online. We schedule an on-site assessment at your Paradise Valley property, usually within a day or two. We inspect the roof, take measurements, and talk with you about what you want: a full replacement, a repair, or a coating. We also check for any signs of storm damage or leaks that need immediate attention.

Step 2: Once you approve the estimate, we pull the required permits from the town of Paradise Valley and coordinate any HOA design review if your neighborhood has one. On the scheduled day, our crew arrives with the materials and gets to work. On larger lots with tight access or steep grades, we plan ahead for equipment placement and staging so we do not tear up your landscaping. We keep you informed throughout the project and protect your property as we work.

Step 3: When the job is done, we clean up thoroughly. We haul away all old materials and debris, magnet-sweep the driveway and yard for nails, and do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and the roof is exactly what you expected.

Pricing for metal roofing in Paradise Valley depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. For a typical custom home, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and metal roof replacement starts around $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts around $7 per square foot. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For specialty materials like copper, expect to start around $20 per square foot. We always provide a free estimate so you know exactly what your project will cost before we begin. Call us at (623) 321-3532 to schedule yours.

My home is on a slope near Camelback Mountain with a steep driveway and limited access. Can you still install a metal roof?
Yes. We work on hillside properties in Paradise Valley regularly. We plan for equipment staging and use methods that protect your landscaping and driveway. During the estimate, we will walk the property and explain how we will handle access and drainage so the installation goes smoothly.
A monsoon storm just lifted some panels on my roof. How fast can you respond for an emergency repair in Paradise Valley?
We prioritize storm damage calls. Call us at (623) 321-3532 and we will schedule an inspection as soon as possible, often the same day or next. We can secure the roof to prevent further damage and provide a written estimate for the permanent repair.
What is the typical cost for a metal roof repair or leak fix on a Paradise Valley home?
Most repairs start at $450, and leak repairs also start at $450. The final cost depends on the extent of the damage, the type of metal roof, and how accessible the area is. We give you a firm quote after inspecting the roof, so there are no surprises.
Do I need a permit to replace my roof in Paradise Valley, and does the town have specific requirements?
Yes, a roofing permit is typically required for a full replacement or re-roof in Paradise Valley. The town has its own permit thresholds and inspection requirements, and we handle the paperwork for you. We always defer to the town of Paradise Valley building department for the latest rules.
My HOA has design review, and my neighbor's roof drains onto my property. What can I do?
We can help with HOA approval by providing material samples and specifications for your roof. For drainage issues, we can assess the situation and recommend solutions like gutters or grading changes that keep water on your property. We are familiar with property line and drainage concerns in Paradise Valley.
Are you fully insured for roofing work in Paradise Valley?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
What kind of maintenance does a metal roof need in Paradise Valley's climate?
In Paradise Valley, the main issues are UV degradation of sealants, loose fasteners from temperature swings, and dust buildup. We recommend an annual inspection, especially before monsoon season, to check fasteners, seals, and flashing. A coating can extend the life of an older metal roof. Call us to schedule a maintenance check.
Why choose us?

Trusted professionals in Phoenix

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Phoenix

All your work handled by qualified professionals in Phoenix

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

268+ Verified Client Reviews in Phoenix

⭐⭐⭐⭐⭐ 4.9/5 · 268 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Phoenix · Response within 24h · No commitment · ☎ (623) 321-3532

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Phoenix ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm